Home icon Product icon Winches icon Deep Storable Sliding Winch
Deep Storable Sliding Winch
enchain
enchain

Deep Storable Sliding Winch

Sliding Winches are designed to move easily in both directions of Multiprens Sliding Winch Track (4500). The winch will fasten in place once pressure is applied to the webbing.

Sliding Winches can also be welded in place for fixed applications. Winches are available in Standard, Low Profile and Deep Storable models.

Designed for positioning along sliding track.

Working Load Limit: 2,500 kgs/5,500 lbs

Weight: 4.82 kgs/10.6 lbs

consulting service

Deep Storable Sliding Winch

Information

 

Winches offer a system for securing cargo on flatbed trailers and other vehicles.Stocks a variety of winches available for specific applications.Winches are manufactured to meet the requirements of the Department of Transportation (DOT) and the California Highway Patrol (CHP). Winches can be used with 2”, 3” or 4” heavy-duty flatbed webbing straps, cable, or a combination of both.

 

▪ Standard height winches are for bottom mounting only.

▪ Low Profile winches are for side mounting.

▪ Deep Storable winches are for bottom mounting and offer added storing capacity.

 

 

Winch Specifications

 

PART NUMBER A (INCHES) B (INCHES) C (INCHES) D (INCHES) WEIGHT (kgs/lbs)
  7 3/4 4 3/4 5 1/2 3 1/2 4.36 kgs 9.6 lbs
  7 7/8 4 7/8 4 1/2 3 7/8 4.14 kgs 9.1 lbs
  8 1/8 4 7/8 7 1/2 3 1/2 4.5 kgs 9.9 lbs
  9 3/4 6 1/2 5 5/8 3 1/2 4.1 kgs 9 lbs
  9 3/4 6 1/2 4 3/8 3 7/8 4.5 kgs 10 lbs
  8 1/8 4 7/8 5 1/2 3 1/2 4.73 kgs 10.4 lbs
  7 3/4 4 7/8 4 3 7/8 4.27 kgs 9.4 lbs
  7 3/4 4 7/8 7 1/2 3 1/2 5.0 kgs 11.0 lbs
  7 3/4 4 7/8 6 3/8 3 7/8 4.45 kgs 9.8 lbs
  8 5 5 1/2 4 1/2 3.9 kgs 8.5 lbs
  7 3/4 4 7/8 7 1/2 3 7/8 4.82 kgs 10.6 lbs
  8 5 5 1/2 4 5.3 kgs 11.5 lbs
  7 5/8 4 7/8 6 1/4 3 7/8 3.63 kgs 8 lbs

 

 

To insure proper engagement, all winches shall be installed so the user can see the pawl. Additionally, the winch shall be positioned so the pawl drops into the ratchet teeth by gravity. Winches shall never be installed in a position where the user cannot see the pawl engagement, or where they must hold the pawl to engage the ratchet tooth. All winches, except portable and sliding styles, must be welded or bolted to the vehicle structure. Minimum welding requirements are 1/4" fillet weld, 4" long on both sides of the frame and 1/8" penetration. If winches are installed in track, the track shall be attached to the vehicle structural members. The vehicle structure should have equal or greater strength than the winch.

Adress: NO.10 ChangAn Road, MaWei District, Fuzhou, China

enchain
SUPPORT BY HANGZHOU GREAT MASTER
chenggong

Sorry, the delivery failed, please check and resubmit!

OK!
shibai

Thank you! your cantact letter has been sent! We will cantact you as soon as possible!

Try Again