Combination Winches are used with winch web straps or wire cable. Combination Winches are available in Standard and Low Profile models.
Combination Winches can hold webbing or wire cable.
Weight: 4.5 kgs/10 lbs
WEBBING: Working Load Limit: 2,500 kgs/5,500 lbs
CABLE: Working Load Limit: 1,515 kgs/3,335 lbs
Suitable For Models:2015 f150
Winches offer a system for securing cargo on flatbed trailers and other vehicles.Stocks a variety of winches available for specific applications.Winches are manufactured to meet the requirements of the Department of Transportation (DOT) and the California Highway Patrol (CHP). Winches can be used with 2”, 3” or 4” heavy-duty flatbed webbing straps, cable, or a combination of both.
▪ Standard height winches are for bottom mounting only.
▪ Low Profile winches are for side mounting.
▪ Deep Storable winches are for bottom mounting and offer added storing capacity.
|PART NUMBER||A (INCHES)||B (INCHES)||C (INCHES)||D (INCHES)||WEIGHT (kgs/lbs)|
|7 3/4||4 3/4||5 1/2||3 1/2||4.36 kgs||9.6 lbs|
|7 7/8||4 7/8||4 1/2||3 7/8||4.14 kgs||9.1 lbs|
|8 1/8||4 7/8||7 1/2||3 1/2||4.5 kgs||9.9 lbs|
|9 3/4||6 1/2||5 5/8||3 1/2||4.1 kgs||9 lbs|
|9 3/4||6 1/2||4 3/8||3 7/8||4.5 kgs||10 lbs|
|8 1/8||4 7/8||5 1/2||3 1/2||4.73 kgs||10.4 lbs|
|7 3/4||4 7/8||4||3 7/8||4.27 kgs||9.4 lbs|
|7 3/4||4 7/8||7 1/2||3 1/2||5.0 kgs||11.0 lbs|
|7 3/4||4 7/8||6 3/8||3 7/8||4.45 kgs||9.8 lbs|
|8||5||5 1/2||4 1/2||3.9 kgs||8.5 lbs|
|7 3/4||4 7/8||7 1/2||3 7/8||4.82 kgs||10.6 lbs|
|8||5||5 1/2||4||5.3 kgs||11.5 lbs|
|7 5/8||4 7/8||6 1/4||3 7/8||3.63 kgs||8 lbs|
To insure proper engagement, all winches shall be installed so the user can see the pawl. Additionally, the winch shall be positioned so the pawl drops into the ratchet teeth by gravity. Winches shall never be installed in a position where the user cannot see the pawl engagement, or where they must hold the pawl to engage the ratchet tooth. All winches, except portable and sliding styles, must be welded or bolted to the vehicle structure. Minimum welding requirements are 1/4" fillet weld, 4" long on both sides of the frame and 1/8" penetration. If winches are installed in track, the track shall be attached to the vehicle structural members. The vehicle structure should have equal or greater strength than the winch.
Sorry, the delivery failed, please check and resubmit!OK!
Thank you! your cantact letter has been sent! We will cantact you as soon as possible!Try Again